Water balance in a spa is a little different than a swimming pool. There is a fraction of the amount of water and it's heated much higher than a pool. Still there are a lot of similarities. The three keys to healthy water are the same... keep your chemicals in balance, filtration is vital and you can't skip cleaning. But take heart... spa maintenance is much easier and takes less time!

Don't be confused or intimidated! Water chemistry is easy. The term "balance" refers to keeping a few key vital signs in a particular range. The "vitals" to look at weekly are alkalinity, pH and sanitizer levels. Just test your water once a week with a reliable test kit and keep those key readings in the proper range.

Start with alkalinity. This is the heart of your spa chemistry and anchors all the chemicals. Test for alkalinity first. It's measured in "parts per million" and your goal is to keep it between 80 and 120 ppm.

To raise it: Use sodium bicarbonate
To lower it: Use sodium bisulfate (dry acid)

Next, check your pH. This is the power of hydrogen and determines how comfortable swimmers are in the water. PH is measured on a scale of 0 -14. A reading of 7.0 is neutral. Your target range is 7.4 to 7.6.

To raise it: Use sodium carbonate
To lower it: Use sodium bisulfate (dry acid)

Finally, check your sanitizer. Sanitizers control the growth of bacteria and algae. Keep enough in the spa's water and you'll have fewer problems. The most common sanitizers are chlorine and bromine and are measured in "parts per million." Your target range is 3.0 to 5.0 ppm.

To raise it: Add more chlorine
To lower it: Let it fall own its own

Keep these chemicals in their proper range and you'll avoid most water problems. Experts recommend testing other chemicals at least once per quarter. Take a water sample into your spa supply retailer and let them test it for stabilization, calcium (hardness) and total dissolved solids. A professional retailer can help you keep these areas in balance as well.

EXPERT TIP: Don't chase the "bounce." Make adjustments slowly and give them a few days to take effect. Chemicals have an impact on each other and you need to give them some time to "settle."